CableFormulaWorkspace
Language: English
Conductor materials

3-core and 4-core cable copper weight: formula and examples

Calculate theoretical copper weight for equal-core 3-core and 4-core cables, with per-metre, 100-metre and kilometre examples and unequal-core guidance.

CableFormula editorial · · 4 min read

For equal-size copper cores, multiply the single-core copper mass by the number of cores. At an assumed density of 8.96 g/cm³, a 3 × 2.5 mm² cable contains a theoretical 0.0672 kg of conductor copper per metre, while 4 × 2.5 mm² gives 0.0896 kg/m.

These are nominal-area estimates of conductor copper, not finished cable weights. Open the copper weight calculator and enter three or four cores to reproduce them.

Formula for equal-size copper cores

Copper mass (kg) = N × A × L × ρ ÷ 1,000

Here, N is the number of copper cores, A is area per core in mm², L is cable length in metres and ρ is the density assumption in g/cm³. The same length applies to each core. Do not multiply cable length by core count and then multiply by N again.

For one metre, the formula becomes kg/m = N × A × ρ ÷ 1,000. For one kilometre it becomes kg/km = N × A × ρ, because the factor of 1,000 metres cancels the grams-to-kilograms conversion.

Equal-core comparison table

All entries below use 8.96 g/cm³, exclude non-conductor materials and treat the stated areas as geometry.

Area per core 3-core copper, kg/m 4-core copper, kg/m 3-core copper, kg/km 4-core copper, kg/km
1.5 mm² 0.04032 0.05376 40.32 53.76
2.5 mm² 0.06720 0.08960 67.20 89.60
4 mm² 0.10752 0.14336 107.52 143.36
6 mm² 0.16128 0.21504 161.28 215.04
10 mm² 0.26880 0.35840 268.80 358.40
16 mm² 0.43008 0.57344 430.08 573.44

At a fixed area and length, four equal copper cores have 4/3, or about 1.333 times, the theoretical conductor mass of three. The finished-cable ratio can be different because insulation, filler, sheath and other construction dimensions may change.

Worked example: 100 metres of 4 × 6 mm²

Use four cores, 6 mm² per core and 100 metres:

4 × 6 × 100 × 8.96 ÷ 1,000 = 21.504 kg

A 100-metre three-core construction at the same nominal area gives:

3 × 6 × 100 × 8.96 ÷ 1,000 = 16.128 kg

The difference is 5.376 kg of theoretical conductor copper. Neither result includes cable insulation, sheath, armour or packaging. Use the finished-weight comparison guide when you need transport or reel weights.

What if one core has a smaller area?

Do not enter four equal cores when the specification says three 16 mm² conductors plus a 10 mm² conductor. Add the areas of the actual copper groups:

Total area = 3 × 16 + 1 × 10 = 58 mm²

At 100 metres and the same density:

58 × 100 × 8.96 ÷ 1,000 = 51.968 kg

Calculate the groups separately in the tool: 43.008 kg plus 8.960 kg. The tool’s core-count field assumes equal areas; it does not interpret a mixed-core designation.

Count construction, not only a product label

Confirm the manufacturer’s full conductor schedule. A name such as “four-core” is not enough to determine whether all cores have equal areas or whether screens, drain wires and other metallic components are present. Include only the copper components you can identify and calculate.

Copper wire screens and braids need a separate construction-based calculation. Steel armour and aluminium components are different materials and must not be valued as copper conductor mass.

Why a measured weight can differ

Nominal area, actual conductor geometry and specified resistance are related but not interchangeable measurements. Stranding path length, construction tolerances and material density can affect actual metal content. For an order, request the supplier’s conductor metal weight and the finished cable mass in the same length units.

This table does not establish current ratings or compliance. See the full copper-weight method for unit conversion and assumptions. To compare illustrative metal prices, use the copper material cost calculator.